Milwaukee Electromagnetic Drill Press

Milwaukee offers a wide range of electromagnetic drill presses for drilling applications on any flat ferrous material, these units deliver superior cutting tool performance and can provide a range of hole diameters up to 5 inches. For use with drill bits and annular cutters.

Clairton Industrial Tool & Supply LLC offers a large selection of Milwaukee electromagnetic drill presses and accessories for the professional craftsman. Browse our elelctromagnetic page below for more information and click the red button for a price quote or call us at 877-702-8665 for assistance.

Milwaukee Electromagnetic Drills & Drill Press Equipment

			Compact Electromagnetic Drill Press - 450 RPM 4270-20 For remote drilling in metal, the 4270-20 is a great choice. The entire tool weighs just 26-1/2 pounds and has a comfortable carrying handle well positioned for balance, with cutter wrenches stored on-board. This is a very portable machine. However, power was not sacrificed for portability. This drill press includes a very powerful 1.1 maximum horsepower, 9.0 amp motor. It can drill up to 1-1/2 in. diameter holes through 2 in. thick steel with annular cutters, or 1/2 in. diameter holes 4-1/4 in. deep with twist drill bits. The tool is setup to accept standard 3/4 in. Weldon shank cutters, or an optional 3-jaw chuck is available for use with twist drill bits. The strong two-coil magnet provides 2,300 lbs. of deadlift force on 1 in. thick steel. The simple two-button control panel is located on the back, away from feed handle obstruction. The feed handle can be conveniently relocated to the opposite side without the use of tools. Milwaukee Electromagnetic Drill Press 4270-20 Features Powerful 9.0 amp 1.1 max HP motor Light weight, only 26.5 lbs. with comfortable carrying handle Capacity to cut up to 1-1/2 in. diameter holes thru 2 in. steel with annular cutters, or 1/2 in. diameter holes, 4-1/4 in. deep with twist drill bits Strong two-coil magnet Two positions for feed handle - relocate without tools Simple two-button control panel - unobstructed by feed handle

Adjustable Position Electromagnetic Drill Press Model 4204-1

This combination unit features the 4203 adjustable position, variable speed base and the 4253-1 1/2 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.

Features

- 1/2 inch capacity, 7.2 amp motor, 600 RPM
- Solid state electronic switching
- Feedback speed control
- Line Lock-Out prevents tool from operating should voltage be restored to an interrupted line

3/4 in. Motor for Electromagnetic
Model 4262-1

This heavy duty unit is built for production drilling and will take the toughest drilling jobs. Model 4262-1 features an 11.5 amp motor with a 3/4 in. chuck. This unit has 350 rpm, geared low for maximum torque. Use the larger 4203 adjustable base for this powerhouse, and no job is to large.Drill Press, 350 RPM 4262-1

Features

- 3/4 inch capacity, 11.5 amp motor, 350 RPM
- Dual Mount Gear Case/Reverse Mount
- Taps up to 1 inch-14 threaded hole
- Develops up to 1670 pounds of drill point pressure

Model 4206-1	Model 4203	Model 4253-1	Model 4292-1
Adjustable Position Electromagnetic Drill Press with 3/4 in. Motor Features - 3/4 inch capacity - 12.5 amp motor, 350 RPM - Solid tate electronic switching - Feedback speed control - Fine Lock-Out	Electromagnetic Drill Press Base, Adjustable Position Features - 120 Volt AC only - 12.5 amp max. rating - 11 inch drill travel - Adjustable position - Variable speed base - For use on any flat ferrous material, 1/2 inch and thicker	1/2 in. Motor for Electromagnetic Drill Press, 600 RPM Features The 4253-1 electromagnetic drill motor features 6.2 amps and a 1/2 in. chuck turning at 600 rpm. This motor is best used on the 4202 fixed position base. Light weight and ample power make this a good choice for smaller holes into steel.	No. 3 MT Motor for Electromagnetic Drill Press, 375/750 RPM Features This heavy duty unit is built for production drilling and will take the toughest drilling jobs. Model 4292-1 features an 11.5 amp motor with a No.3 Morris Taper Chuck. This two speed unit has 375 and 750 rpm, geared low for maximum torque. Use the larger 4203 adjustable base for this powerhouse, and no job is to large.

Model 4202	Model 4210-1	Model 4297-1	Compact Electromagnetic Drill Press Kit
Electromagnetic Drill Press Base, Fixed Position Features - 120 Volt AC only - 12.5 amp max. rating - 9 inch drill travel - Fixed position - Variable speed base - For use on any flat ferrous material, 1/2 inch and thicker	Fixed Position Electromagnetic Drill Press with 3/4 in. Motor Features - 3/4 inch capacity - 12.5 amp motor, 350 RPM - Solid state electronic switching - Feedback speed control - Line Lock-Out	No. 3 MT Motor for Electromagnetic Drill Press, 250/500 RPM Features This heavy duty unit is built for production drilling and will take the toughest drilling jobs. Model 4297-1 features an 11.5 amp motor with a No.3 Morris Taper Chuck. This two speed unit has 250 and 500 rpm, geared low for maximum torque. Use the larger 4203 adjustable base for this powerhouse, and no job is to large.	Compact Electromagnetic Drill Press Kit - 450 RPM 4270-21 Features For remote drilling in metal, the 4270 is a great choice. The entire tool weighs just 26-1/2 pounds and has a comfortable carrying handle well positioned for balance, with cutter wrenches stored on-board. This is a very portable machine. However, power was not sacrificed for portability. This drill press includes a very powerful 1.1 maximum horsepower, 9.0 amp motor.

Clairton Industrial To

Milwaukee Electromagnetic Drill Press

Milwaukee Electromagnetic Drills & Drill Press Equipment

Didn't find the Milwaukee Electromagnetic Drill Press you were looking for?

Have a question or need assistance in selecting an elelctromagnetic drill press?

Call us at 1-877-702-8665 or click here to contact us online.